Type 1 : Stainless steel (316) drop nose pin

With positive latch and finger pull head.

The pin latch is rotated in line with the pin shaft and then on fitting, the latch is rotated 90º and pushed to a central location where it snaps into place.

The sprung lock operates on the latch in both the open and closed position. Pushing the plate releases the lock, allowing it to be turned and the pin removed.

Standard diameters are:-
6mm, 8mm, 10mm and 12mm, 

Grip lengths from 20mm up to 120mm

These pins are made to order - a minimum of 5 pins is required.

Prices start from £9.00 each