Jack Nut ® - a threaded insert for all materials

The JACK NUT threaded insert is a blind fastener designed for use in thin, soft, or brittle materials. When tightened, the body of the jack nut collapses to form legs which grip the inside of the mounting surface, leaving a permanent, reusable threaded insert. 

Jack nuts are available in steel only, small packs of 10, 25 and 50, regular packs of 100, 500 or 1000

Simple wrench available for setting small quantities of jack nuts

Jack nuts fasten in a blind hole, designed for plastics or thin sheet metals and fastens securely despite burrs or uneven substrate.

This fastener is only offered in steel with a zinc plate.
We are able to offer the M5SN and M6SN with a thicker zinc plating as a special part.
 

Thread Jacknut Grip Range mm Jack nut insert
M4 SN 0.38 - 4.75
M4 LN 4.75 - 9.53
M5 SN 0.38 - 4.75
M5 LN 4.75 - 9.53
M6 SN 0.38 - 4.75
M6 LN 4.75 - 9.53

Datasheet in pdf format

Home ] Jacknut setting ] Jacknut tools ] Jack nut sizes ]

Primary Fasteners 0121 2475191   Fax 0121 5357094

Mail Link