|
Wire Lock Pins / Shaft
Locking Pin
|
|
Wire Lock pins are a headed plated steel pin with an
attached wire loop (keep) that is pulled over the pin end to retain or pulled off to
remove the pin. The keep loop is spring steel wire.
Supplied individually and in packs of 10, 50 or 100, prices from £1 per
pin plus vat and carriage |
|
|
|
|
Code |
Size
(A x B) |
Loop |
B
(Overall Length) |
Pin
Diameter |
C
(Max Grip) |
E
(Loop) |
| W2RDP |
1/4" x 2 1/2" |
Round |
2.6" |
1/4" |
2.00 |
1.50 |
| W3RDP |
5/16 x 2 3/4" |
Round |
2.7" |
5/16" |
2.25 |
1.37 |
| W4RDP |
3/8 x 2 1/2" |
Round |
2.7" |
3/8" |
2.25 |
1.50 |
|
All dimensions are imperial and are
subject to change - manufacturing tolerances apply, all dimensions are
nominal, please contact our support staff where dimensions are
critical. |
|
|
|
View of looped end over the pin
forming the closure |
View of open wire lock pin. The
term 'shaft lock' is also used derived from the profile of the wire
loop. |
|
A square profile is available in
3/8 inch diameter 2.5 inch
pin length, 2.25 inch effective length
Part W7SQD |
 |
|